Net2 Nano communicates with Net2 software at a central point by a secure, low power radio link. This means that your installation is more cost effective and less disruptive as no cable is required to communicate between doors. In addition, Net2 Nano benefits from unique ease of installation and configuration – no knowledge of networks is required.

One Net2 Nano controls a single door, gate or barrier. It may be installed as part of a Net2 installation alongside other Net2 Nano, Net2 plus or Net2 classic access control units. Simply connect a Net2Air USB bridge to the central Net2 server PC and the Net2 software will discover and communicate with Net2 Nano control units within range. A secure pairing procedure ensures that communications are private and restricted to the site.

If there is an existing TCP/IP Ethernet network, a Net2Air Ethernet bridge may be used to extend the communication distance from the central server PC.

As with all Net2 control units, Net2 Nano is designed to work seamlessly in the event of communications failure. It will continue to permit or deny access to users as appropriate. Once
communications are re-established the activity is reported back to the PC.

Other hardware features:

• Volt free control relay
• Input for PSU fail
• Input for tamper
• Integrated lock diodes

DS1043 Net2 nano